|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Micrel, Inc. QUAD DRIVER SY10E112 SY100E112 SY10E112 SY100E112 FEATURES s s s s 600ps max. propagation delay Extended 100E VEE range of -4.2V to -5.5V Common enable input Fully compatible with industry standard 10KH, 100K I/O levels s Internal 75K input pulldown resistors s Fully compatible with Motorola MC10E/100E112 s Available in 28-pin PLCC package DESCRIPTION The SY10/100E112 are quad drivers designed for use in new, high-performance ECL systems. The E112 has two pairs of OR/NOR outputs from each gate and a common, buffered enable input. The data input can also be used as an ECL memory address fan-out driver, although the E111 is designed specifically for this purpose, and offers lower skew than the E112. For memory address driver applications where scan capabilities are required, please refer to the SY10/100E212 device. BLOCK DIAGRAM Q0a Q0b Q0a Q0b Q1a D1 Q1b Q1a Q1b Q2a Q2b Q2a Q2b Q3a Q3b Q3a Q3b PIN NAMES Pin D0-D3 EN Qna, Qnb Qna, Qnb VCCO Function Data Inputs Enable Input True Outputs Inverting Outputs VCC to Output D0 D2 D3 EN M9999-032006 hbwhelp@micrel.com or (408) 955-1690 Rev.: G Amendment: /0 1 Issue Date: March 2006 Micrel, Inc. SY10E112 SY100E112 PACKAGE/ORDERING INFORMATION Ordering Information(1) VCCO Q2b Q2a Part Number SY10E112JI 18 17 Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Package Marking SY10E112JI SY10E112JI SY100E112JI SY100E112JI SY10E112JC SY10E112JC SY100E112JC SY100E112JC Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Q3b 25 24 23 22 21 20 19 Q3a Q3b Q3a VCCO D3 D2 VEE D1 D0 EN 26 27 28 1 2 3 4 5 6 7 8 9 10 11 Q2b Q2a VCC Q1b Q1a Q1b Q1a SY10E112JITR(2) SY100E112JI SY100E112JITR(2) SY10E112JC SY10E112JCTR(2) SY100E112JC SY100E112JCTR(2) SY10E112JY(3) SY10E112JYTR(2, 3) SY100E112JY(3) SY100E112JYTR(2, 3) Notes: PLCC TOP VIEW J28-1 16 15 14 13 12 NC VCCO Q0a Q0b VCCO Q0a Q0b 28-Pin PLCC (J28-1) SY10E112JY with Matte-Sn Pb-Free bar-line indicator SY10E112JY with Matte-Sn Pb-Free bar-line indicator SY100E112JY with Matte-Sn Pb-Free bar-line indicator SY100E112JY with Matte-Sn Pb-Free bar-line indic ator 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10E112 SY100E112 TRUTH TABLE EN L H Qn Dn H Qn Dn L DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = -40C Symbol IIH Parameter Input HIGH Current EN D Power Supply Current 10E 100E -- -- 47 47 56 56 -- -- 47 47 56 56 -- -- 47 47 56 56 -- -- 47 54 56 65 TA = 0C TA = +25C Max. Min. Typ. 150 200 -- -- -- -- TA = +85C Max. 150 200 mA Unit A -- -- -- -- 150 200 -- -- -- -- 150 200 -- -- -- -- Min. Typ. Max. Min. Typ. Max. Min. Typ. IEE AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = -40C Symbol tPD Parameter Min. TA = 0C TA = +25C Max. Min. Typ. 600 675 -- -- 700 200 275 -- -- 275 400 450 80 40 425 TA = +85C Typ. Max. 400 450 80 40 425 600 675 ps -- -- 275 80 40 425 -- -- 700 -- -- 275 80 40 425 -- -- 700 -- -- 275 -- -- 700 ps Unit ps 400 450 600 675 200 275 400 450 600 675 200 275 Typ. Max. Min. Typ. Max. Min. Propagation Delay to Output D 200 EN 275 Within-Device Skew Dn to Qn, Qn(1) Qna to Qnb(2) Rise/Fall Time 20% to 80% tskew tr tf Notes: 1. Within-device skew is defined as identical transitions on similar paths through a device. 2. Skew defined between common OR or common NOR outputs of a single gate. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10E112 SY100E112 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY100E112JY |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |